Virtualbox Lsi Logic Scsi Driver Windows Xp

I needed to build several virtual XP systems to test with the LSI SAS controller option in vmware. Below is a summary of how I was able to create an XP install media with the drivers as part of the media so I wouldn't have to remember to push F6 when the install process starts. Windows will not see a harddrive to install into without loading additional drivers. You will receive this message about the LSI Logic SAS controller when trying to select the controller when building an XP VM.

VirtualBox 5: SCSI Hard Disk Controller. The focus of this. A hard disk attached to the controller's first port cannot be detected by the. I can only tell you that no hdd drivers are bundled with VirtualBox. Find Windows SCSI drivers. Search term 'windows 2012 r2 lsi logic. VirtualBox 5: SCSI Hard Disk Controller. SCSI (Small Computer. A hard disk attached to the controller's first port cannot be detected by the. Probably you are not using a proper Windows XP LSI driver. Lot of scsi drivers with the thinking that XP users were. An xp vm using bus logic to lsi?

It does provide a useful link. I downloaded the drivers from. Then using I extracted all the driver files to a folder. Then I created a new ISO incorporating the LSI drivers from my original XP install media.

I chose 'textmode' when adding the drivers. When attempting to boot the VM, you will receive this pop-up message about the compatibility of the LSI Logic SAS SCSI adapter and Windows XP. The install should launch. Timing Software Mac. Attachment Size 28.34 KB 21.73 KB.

I would like to draw to your attention the following problem. I can not provide further information as I’ve return the system back to the previous stable version. Virtual box version 4.0.12 Hard drives connected: SAS Controller LsiLogic Window XP Host Window XP Guest Current status: No known ‘major’ problems. Upgrade to version 4.1.4 All XP guests VM BSOD with 07b error (Hardware problem) Moved SAS connected drive to IDE controller. No BSOD but upon further investigations found SAS controller service/drivers are broken/failed to load correctly (4.1.4) Thank you for your time.

Replying to: Can you attach a VBox.log of the VM with 4.0.12 and one when 4.1.4 is used please? The VM configuration might help too. I seem to have lost my first reply to you so I start again. Log VB_002 is version 4.0.14 and working well Log VB_002_2 needs deleting (copy) Log VB_4.14_BSOD is version 4.14 and BSOD with STOP 0x.7B I'm needing this system so I shall fully restore (4.0.14) once this report is sent. All my VM's are based or similar on the following: 1x HDD (partitioned) LSI Adaptor SAS 3000 Series 8-port with 1068 driver 1.34.2.0 dated 2x Intel PRO/1000 MT team'd as ALB/link @ 2.0 GBps VB Bridged networking only. 1x FDD drive 1x CDROM drive Hope this is of some help but as I said it's the LSI controller falling over here, thank you for your time. Replying to: Still relevant with VBox 4.1.6?